Wavetrax Notching Tool

The WaveTrax Notching Tool creates notches on WaveTrax plastic trough. The notches are used for attaching junctions to WaveTrax trough. For four-inch, six-inch and 12-inch trough installations, apply one or two notches on each side of a trough and one or more notches on the bottom of the trough. Space the notches evenly; For most installations, one notch per side and one or two notches on the bottom of the trough is adequate. For two-inch trough, only apply one notch to each side; The snap-together WaveTrax overhead cable raceway system from Amphenol reduces time spent on installations and retrofits